Westerstukken 45
9761 LJ Eelde
The Netherlands
T: +31 - (0)50 - 3096273
F: +31 - (0)50 - 3096277
E: wfvdmast@chopcot.com
Open
Ready to run
Release bolt
Remove Chopcot
9761 LJ Eelde
The Netherlands
T: +31 - (0)50 - 3096273
F: +31 - (0)50 - 3096277
E: wfvdmast@chopcot.com
Open
Ready to run
Release bolt
Remove Chopcot
Chopcot® T5
The objective of Chopcot® T5 is to have a completely closed chopper for dosing purposes. No product contamination. Chopcot® T5 is fixed on its skirt without bolting. After closing by tipping the chopper it is locked on the skirt. In this position the safety switch gives clearance for operation by the insertion of the key that is mounted on the chopper. The switch is used to interrupt the electrical feed to the drive when the chopper is in open position.
The change-out of the Chopcot® is done within half a minute by disconnecting the locking bolt.
It is possible to replace the skirt by a funnel, to have direct vertical discharge from the chopper downwards, click "Products / Miscellaneous".
Technical data
| Electrical Feed: | 230/400 Vac, 50Hz |
|
Power: |
0,37kW |
|
Weight: |
8,5kg (skirt excluded) |
|
Capacity: |
3 strands of each 2400tex at RPM2250: 3kg/min 3 strands of each 1600tex at RPM2250: 2kg/min |
|
Max RPM: |
3000 (=525m/min) |
|
Chopping length: |
5mm, 10mm, 15mm, etc. |